CALL TODAY FOR AN ESTIMATE: (305) 233-1316 -|- Florida Contractor Licenses: CGC1519100 | CCC1329567 | MRSR1773

Sunken Concrete Repair

How To Deal With Sunken Concrete Repairs

In the past techniques for repair of sunken concrete have varied. Wood, concrete, cement and steel have been poured, pushed, or forced into the ground trying to save these foundations and slabs and usually the repair attempts were useless. Other better and successful methods of remediation required extensive disruption of the family or business using the building. Usually, it is best for all parties that settlement of slabs and foundations in residential areas be corrected without having to move all furniture, appliances, and possibly the whole family, or in commercial areas, without disrupting business.

However, with current technology and trained crews, there are a number of very successful solutions to the problem of sunken concrete that require little or no disruption to normal living or businesses.

The two most common methods of this type of repair are Slabjacking and Hydraulic Jacking (also known as Piering)

With a slab-jacking operation, grout material is pumped beneath a slab or beam to produce a lifting force that restores the member to its original elevation.

In Piering, steel posts are driven through unstable soil and hydraulic jacks are used to lift and stabilize concrete slabs affected by changes in the underlying soil. Any repair method employed will depend on the type of distress being treated.

Slabjacking or Piering?

Before deciding on a repair method, you must determine what is causing the damage or failure. Investigate moldings and trim boards, mortar joints in brick veneer, and windows in low areas for clues. Take note of recent weather. Unusually dry or wet weather can cause problems in the underlying soil.

The most common method to correct smaller slabs of sunken concrete, such as residential slabs, driveways, sidewalks, swimming pool decks, etc. is Slabjacking.

Slabjacking is done by pumping a cement grout through small, strategically-located holes in the concrete slab. Once in place, the grout hardens into a dense concrete mass and provides a competent bearing for the concrete slab. If a soil-cement-lime grout is used, the lime content of the slurry will impart the benefits of lime stabilization to the base or sub-base. This combined treatment not only restores the slab to proper grade but also stabilizes the sub-soil to prevent re-occurrence of the problem.

For larger problems, especially those found in house and commercial building foundation shifting, piering is typically used to lift and stabilize the foundation.

Piering involves the use of strategically placed mechanical jacks to lift the settled beam to grade. The beam must be raised carefully to avoid further or unnecessary damage. Once raised, the beam is held to elevation by a specially designed spread footing and pier. The footing is set deep enough so that it will be independent of variations in soil moisture. It is also designed to adequately distribute the load without creating unnecessary bulk or mass. The pier is tied into the footing with steel and supports the foundation beam.

Contact Us Today For An Estimate and Consultation

CALL: (305) 233-1316

Master Certified
 Licensed & Insured:
General Contractor – CGC-1519100
Roofing Contractor – CCC-1329567
Certified Mold Remediator – MRSR1773

Perfection Seawalls, Concrete & Roofing